ensp静态路由综合实验（一）

2024-03-23 14:30:02
开发
21

实验拓扑：

实验目的：

1、R6为ISP，接口IP地址均为公有地址，该设备只能配置IP地址，之后不能再对其进行任何配置；
2、R1-R5为局域网，私有IP地址192.168.1.0/24，请合理分配；
3、R1、R2、R4，各有两个环回IP地址；R5,R6各有一个环回地址；所有路由器上环回均代表连接用户的接口；
4、R3下面的两台PC通过DHCP自动获取IP地址；
5、选路最佳，路由表尽量小，避免环路；
6、R1-R5均可以访问R6的环回；
7、R6 telnet R5的公有地址时，实际登录到R1上；
8、R4与R5正常通过1000M链路，故障时通过100m链路；

实验内容：

子网划分：

R1环回 192.168.1.32/28 192.168.1.48/28 汇总192.168.1.32/27

R2环回 192.168.1.64/28 192.168.1.80/28 汇总 192.168.1.64/27

R4环回 192.168.1.128/28 192.168.144/28 汇总 192.168.1.128/27

R1配置:

<Huawei>sys    
<Huawei>system-view 
[Huawei]sys    
[Huawei]sysname R1
[R1]
#配置环回接口
[R1]int loopback 0
[R1-LoopBack0]ip add 192.168.1.33 28
[R1-LoopBack0]int loopback 1
[R1-LoopBack1]ip add 192.168.1.49 28
[R1-LoopBack1]q
[R1]int g 0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.1 30
[R1-GigabitEthernet0/0/0]q
[R1]int g 0/0/1 
[R1-GigabitEthernet0/0/1]ip add 192.168.1.9 30
[R1-GigabitEthernet0/0/1]q

#配置静态路由
[R1]ip route-static 192.168.1.65 28 192.168.1.2
[R1]ip route-static 192.168.1.81 28 192.168.1.2	
[R1]ip route-static 192.168.1.5 28 192.168.1.2
[R1]ip route-static 192.168.1.97 27 192.168.1.10
[R1]ip route-static 192.168.1.13 30 192.168.1.10
[R1]ip route-static 192.168.1.14 30 192.168.1.10
[R1]ip route-static 192.168.1.129 28 192.168.1.2
[R1]ip route-static 192.168.1.145 28 192.168.1.2
[R1]ip route-static 192.168.1.17 30 192.168.1.2
[R1]ip route-static 192.168.1.21 30 192.168.1.2
[R1]ip route-static 192.168.1.161 27 192.168.1.2
[R1]ip route-static 192.168.1.161 27 192.168.1.10
[R1]ip route-static 192.168.1.129 28 192.168.1.10
[R1]ip route-static 192.168.1.145 28 192.168.1.10

[R1]ip route-static 192.168.1.32 27 NULL 0

#缺省路由
[R1]ip route-static 0.0.0.0 0 192.168.1.2
[R1]ip route-static 0.0.0.0 0 192.168.1.10

#配置telent服务
[R1]aaa
[R1-aaa]local-user rrl password cipher  rrl12345 privilege level 15
Info: Add a new user.
[R1-aaa]local-user rrl service-type telnet 
[R1-aaa]q	
[R1]user-in	
[R1]user-interface v	
[R1]user-interface vty 0 4
[R1-ui-vty0-4]au	
[R1-ui-vty0-4]authentication-mode aaa

R2配置：

<Huawei>sys    
<Huawei>system-view 
[Huawei]sys    
[Huawei]sysname R2
[R2]
#配置环回接口
[R2]int loopback 0
[R2-LoopBack0]ip add 192.168.1.65 28
[R2-LoopBack0]int loopback 1
[R2-LoopBack1]ip add 192.168.1.81 28
[R2-LoopBack1]q
[R2]int g 0/0/0
[R2-GigabitEthernet0/0/0]ip add 192.168.1.2 30
[R2-GigabitEthernet0/0/0]q
[R2]int g 0/0/1 
[R2-GigabitEthernet0/0/1]ip add 192.168.1.5 30
[R2-GigabitEthernet0/0/1]q

#配置静态路由
[R2]ip route-static 192.168.1.65 28 192.168.1.1
[R2]ip route-static 192.168.1.81 28 192.168.1.1
[R2]ip route-static 192.168.1.9 30 192.168.1.1
[R2]ip route-static 192.168.1.129 28 192.168.1.6	
[R2]ip route-static 192.168.1.145 28 192.168.1.6
[R2]ip route-static 192.168.1.17 30 192.168.1.6
[R2]ip route-static 192.168.1.21 30 192.168.1.6
[R2]ip route-static 192.168.1.14 30 192.168.1.6
[R2]ip route-static 192.168.1.97 27 192.168.1.6
[R2]ip route-static 192.168.1.97 27 192.168.1.1
[R2]ip route-static 192.168.1.161 27 192.168.1.6

[R2]ip route-static 192.168.1.64 27 NULL 0

#缺省路由
[R2]ip route-static 0.0.0.0 0 192.168.1.6

R3配置：

[R3]int g 0/0/0
[R3-GigabitEthernet0/0/0]ip add	
[R3-GigabitEthernet0/0/0]ip address 192.168.1.10 30
Mar 19 2024 16:02:10-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R3-GigabitEthernet0/0/0]q
[R3]
[R3]int g0/0/2
[R3-GigabitEthernet0/0/2]ip add 192.168.1.97 27
[R3-GigabitEthernet0/0/2]q
[R3]int g0/0/1
[R3-GigabitEthernet0/0/1]ip add 192.168.1.13 30
[R3-GigabitEthernet0/0/1]q

#dhcp配置
[R3]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[R3]int g0/0/2	
[R3-GigabitEthernet0/0/2]dhcp select global 
[R3-GigabitEthernet0/0/2]q
[R3]ip pool 1
Info: It's successful to create an IP address pool.
[R3-ip-pool-1]network 192.168.1.96 mask 27
[R3-ip-pool-1]gateway-list 192.168.1.97
[R3-ip-pool-1]dns	
[R3-ip-pool-1]dns-list 114.114.114.114
[R3-ip-pool-1]q


#静态路由配置
[R3]ip route-static 192.168.1.33 28 192.168.1.9
[R3]ip route-static 192.168.1.49 28 192.168.1.9
[R3]ip route-static 192.168.1.1 30 192.168.1.9
[R3]ip route-static 192.168.1.6 30 192.168.1.14
[R3]ip route-static 192.168.1.129 28 192.168.1.14
[R3]ip route-static 192.168.1.145 28 192.168.1.14
[R3]ip route-static 192.168.1.17 30 192.168.1.14
[R3]ip route-static 192.168.1.21 30 192.168.1.14
[R3]ip route-static 192.168.1.65 28 192.168.1.9
[R3]ip route-static 192.168.1.65 28 192.168.1.14
[R3]ip route-static 192.168.1.81 28 192.168.1.14
[R3]ip route-static 192.168.1.81 28 192.168.1.9
[R3]ip route-static 192.168.1.161 27 192.168.1.14

#缺省路由
[R3]ip route-static 0.0.0.0 0 192.168.1.14

R4配置：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys	
[Huawei]sysname R4
[R4]int loo	
[R4]int LoopBack 0
[R4-LoopBack0]ip add 192.168.1.129 28
[R4-LoopBack0]q
[R4]int loo	
[R4]int LoopBack 1
[R4-LoopBack1]ip add 192.168.1.145 28
[R4-LoopBack1]q
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]ip add 192.168.1.6 30
[R4-GigabitEthernet0/0/0]q
[R4]int g0/0/1
[R4-GigabitEthernet0/0/1]ip add 192.168.1.14 30
[R4-GigabitEthernet0/0/1]q
[R4]int g0/0/2
[R4-GigabitEthernet0/0/2]ip add 192.168.1.17 30
[R4-GigabitEthernet0/0/2]q
[R4]int g4/0/0
[R4-GigabitEthernet4/0/0]ip add 192.168.1.21 30
[R4-GigabitEthernet4/0/0]q


#静态路由配置
[R4]ip route-static 192.168.1.2 30 192.168.1.5	
[R4]ip route-static 192.168.1.97 27 192.168.1.13
[R4]ip route-static 192.168.1.10 30 192.168.1.13
[R4]ip route-static 192.168.1.33 30 192.168.1.13
[R4]ip route-static 192.168.1.49 30 192.168.1.13
[R4]ip route-static 192.168.1.65 28 192.168.1.5
[R4]ip route-static 192.168.1.81 28 192.168.1.5
[R4]ip route-static 192.168.1.161 27 192.168.1.18
[R4]ip route-static 192.168.1.161 27 192.168.1.22
[R4]ip route-static 192.168.1.33 30 192.168.1.5
[R4]ip route-static 192.168.1.49 30 192.168.1.5

[R4]ip route-static 192.168.1.128 27 NULL 0

#缺省路由
[R4]ip route-static 0.0.0.0 0 192.168.1.18
[R4]ip route-static 0.0.0.0 0 192.168.1.22


#更改优先级
[R4]ip route-static 0.0.0.0 0 192.168.1.22 preference 61

R5配置：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys	
[Huawei]sysname R5
#环回接口
[R5]int LoopBack 0
[R5-LoopBack0]ip add 192.168.1.161 27
[R5]int g0/0/0
[R5-GigabitEthernet0/0/0]ip add 192.168.1.18 30
[R5-GigabitEthernet0/0/0]q
[R5]int g0/0/2
[R5-GigabitEthernet0/0/2]ip add 192.168.1.22 30
[R5-GigabitEthernet0/0/2]q
[R5]int g0/0/1 
[R5-GigabitEthernet0/0/1]ip add 12.0.0.1 24
[R5-GigabitEthernet0/0/1]q
[R5]q
<R5>save

#静态路由配置
[R5]ip route-static 192.168.1.6 30 192.168.1.17
[R5]ip route-static 192.168.1.65 28 192.168.1.17
[R5]ip route-static 192.168.1.81 28 192.168.1.17
[R5]ip route-static 192.168.1.14 30 192.168.1.17
[R5]ip route-static 192.168.1.97 27 192.168.1.17
[R5]ip route-static 192.168.1.2 30 192.168.1.17
[R5]ip route-static 192.168.1.10 30 192.168.1.17
[R5]ip route-static 192.168.1.33 28 192.168.1.17
[R5]ip route-static 192.168.1.49 28 192.168.1.17
[R5]ip route-static 192.168.1.129 28 192.168.1.21
[R5]ip route-static 192.168.1.145 28 192.168.1.21
[R5]ip route-static 192.168.1.6 30 192.168.1.21
[R5]ip route-static 192.168.1.65 28 192.168.1.21
[R5]ip route-static 192.168.1.81 28 192.168.1.21
[R5]ip route-static 192.168.1.2 30 192.168.1.21
[R5]ip route-static 192.168.1.33 28 192.168.1.21
[R5]ip route-static 192.168.1.49 28 192.168.1.21
[R5]ip route-static 192.168.1.10 30 192.168.1.21
[R5]ip route-static 192.168.1.97 27 192.168.1.21

#公网配置
[R5]ip route-static 0.0.0.0 0 12.0.0.6
[R5]acl 2000                	
[R5-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[R5-acl-basic-2000]q
[R5]  int 0/0/1
[R5]int g0/0/1
[R5-GigabitEthernet0/0/1]nat o	
[R5-GigabitEthernet0/0/1]nat outbound 2000
[R5-GigabitEthernet0/0/1]q

#telent地址1映射
[R5]int g0/0/1
[R5-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 23 in	

[R5-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 23 ins
ide 192.168.1.1 23
Warning:The port 23 is well-known port. If you continue it may cause function fa
ilure.
Are you sure to continue?[Y/N]:y


#更改优先级，将192.168.1.20网段优先级改为61
[R5]ip route-static 192.168.1.0 30 192.168.1.21 pre 61
Info: Succeeded in modifying route.
[R5]ip route-static 192.168.1.4 30 192.168.1.21 pre 61
Info: Succeeded in modifying route.
[R5]ip route-static 192.168.1.8 30 192.168.1.21 pre 61
Info: Succeeded in modifying route.
[R5]ip route-static 192.168.1.12 30 192.168.1.21 pre 61
[R5]ip route-static 192.168.1.64 27 192.168.1.21 pre 61
[R5]ip route-static 192.168.1.32 27 192.168.1.21 pre 61
[R5]ip route-static 192.168.1.128 27 192.168.1.21 pre 61
[R5]ip route-static 192.168.1.96 27 192.168.1.21 pre 61

R6配置：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys	
[Huawei]sysname R6
[R6]int g0/0/0
[R6-GigabitEthernet0/0/0]ip add 12.0.0.6 24
[R6-GigabitEthernet0/0/0]q
[R6]int LoopBack 0
[R6-LoopBack0]ip add 1.1.1.6 24

原文地址:https://blog.csdn.net/rrl18215821889/article/details/136784571 本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：https://www.suanlizi.com/kf/1771424145268150272.html 如若内容造成侵权/违法违规/事实不符，请联系《酸梨子》网邮箱：1419361763@qq.com进行投诉反馈，一经查实，立即删除！

阅读全部