一、开发环境
1.在大恒图像官网下载SDK安装包，安装SDK后，打开安装目录找到Samples文件夹，然后找到Samples\CSharp SDK\x64\DoNET\.NET4.0文件夹下找到GxIAPINET.dll，如图：
2.打开VS2019软件，建立winfrom项目，引用GxIAPINET.dll到项目，如下图：
3.将相机连接到PC的USB3.0接口
二、二次开发类
开发代码：相机连接类SvDaHengUSB3包含连接相机、关闭相机连接、修改相机配置和相机采集几个方法，代码如下：
using HalconDotNet;
using GxIAPINET;
/// <summary>
/// 大恒图像工业相机
/// </summary>
public class SvDaHengUSB3
{
IGXFactory U3_IGXFactory = null;//<Factory对像
List<IGXDeviceInfo> U3_IGXDeviceInfo = new List<IGXDeviceInfo>();
IGXDevice Cam = null;
IGXStream Cam_Stream = null; //<流对像
IGXFeatureControl Cam_RemoteControl = null; //<远端设备属性控制器对像
IGXFeatureControl Cam_Control = null; //<流层属性控制器对象
/// <summary>
/// 连接相机
/// </summary>
public override void Initial()
{
base.Initial();
try
{
U3_IGXFactory = IGXFactory.GetInstance();
U3_IGXFactory.Init();
U3_IGXDeviceInfo.Clear();
if (null != U3_IGXFactory)
{
U3_IGXFactory.UpdateDeviceList(200, U3_IGXDeviceInfo);
}
//通过SN打开设备
//GX_ACCESS_CONTROL以控制的方式打开相机
//GX_ACCESS_EXCLUSIVE以独占的方式发开相机
//GX_ACCESS_READONLY以只读的方式打开相
Cam = U3_IGXFactory.OpenDeviceBySN(SN, GX_ACCESS_MODE.GX_ACCESS_EXCLUSIVE);
//获取流通道个数
uint stream_num = Cam.GetStreamCount();
//打开设备的流
Cam_Stream = Cam.OpenStream(0);
//获取远端设备属性控制器
Cam_RemoteControl = Cam.GetRemoteFeatureControl();
//获取本地属性控制器
Cam_Control = Cam.GetFeatureControl();
关闭设备
//Cam.Close();
if (Cam == null)
{
throw new Exception($"相機{SN}連接失敗");
}
//if (Colorful == "黑白")
//{
// Cam_RemoteControl.GetEnumFeature("PixelFormat").SetValue("Mono8");//像素格式
// result = 1;
//}
//else
//{
// Cam_RemoteControl.GetEnumFeature("PixelFormat").SetValue("BayerBG8");//像素格式
// Cam_RemoteControl.GetEnumFeature("BalanceWhiteAuto").SetValue("Off");//自动白平衡
// Cam_RemoteControl.GetEnumFeature("BalanceRatioSelector").SetValue("Red");//自动白平衡通道
// Cam_RemoteControl.GetEnumFeature("BalanceRatio").SetValue("2f");//白平衡系数
// Cam_RemoteControl.GetEnumFeature("BalanceRatioSelector").SetValue("Green");
// Cam_RemoteControl.GetEnumFeature("BalanceRatio").SetValue("1f");
// Cam_RemoteControl.GetEnumFeature("BalanceRatioSelector").SetValue("Blue");
// Cam_RemoteControl.GetEnumFeature("BalanceRatio").SetValue("2f");
// result = 1;
//}
//Cam_RemoteControl.GetEnumFeature("TriggerMode").SetValue("On");//触发模式
//Cam_RemoteControl.GetEnumFeature("TriggerSource").SetValue("Software");//触发源
//Cam_RemoteControl.GetEnumFeature("ExposureAuto").SetValue("Off");//自动曝光
//Cam_RemoteControl.GetEnumFeature("GainAuto").SetValue("Off");//自动增益
//Cam_RemoteControl.GetFloatFeature("ExposureTime").SetValue((float)Exposure);//曝光
//Cam_RemoteControl.GetFloatFeature("Gain").SetValue((float)Gain);//增益
//if (result <= 0)
//{
// throw new Exception($"相機{SN}開啟失敗");
//}
Thread.Sleep(500);
Snap();
}
catch (Exception ex)
{
SvMaster.Log.WriteError(ex);
}
}
//关闭相机
public override void Close()
{
try
{
// 如果未停采则先停止采集
if (null != Cam_RemoteControl)
{
Cam_RemoteControl.GetCommandFeature("AcquisitionStop").Execute();
Cam_RemoteControl = null;
}
//停止流通道、注销采集回调和关闭流
if (null != Cam_Stream)
{
Cam_Stream.StopGrab();
//注销采集回调函数
Cam_Stream.UnregisterCaptureCallback();
Cam_Stream.Close();
Cam_Stream = null;
Cam_Control = null;
}
//关闭设备
if (null != Cam)
{
Cam.Close();
Cam = null;
}
}
catch (Exception ex)
{
SvMaster.Log.WriteError(ex);
}
}
//修改相机配置
public override void AdaptCamera()
{
try
{
Cam_RemoteControl.GetFloatFeature("ExposureTime").SetValue((float)Exposure);//曝光
Cam_RemoteControl.GetFloatFeature("Gain").SetValue((float)Gain);//增益
}
catch (Exception ex)
{
SvMaster.Log.WriteError(ex);
}
}
//相机采集
public override HObject Snap()
{
HObject image = null;
try
{
//单采集
Cam_Stream.StartGrab();
Cam_RemoteControl.GetCommandFeature("AcquisitionStart").Execute();
IImageData images = Cam_Stream.GetImage(1000);//超时ms
if (images.GetStatus() == GX_FRAME_STATUS_LIST.GX_FRAME_STATUS_SUCCESS)
{
HOperatorSet.GenImage1(out image, "byte", images.GetWidth(), images.GetHeight(), images.GetBuffer());
image = BayerToRgb(image, "bayer_bg");
image = RotateImage(image);
//获取到完整帧图像进行图像处理
images.Destroy();
}
else
{
Cam_RemoteControl.GetCommandFeature("AcquisitionStop").Execute();
Cam_RemoteControl = null;
Cam_Stream.StopGrab();
//注销采集回调函数
Cam_Stream.UnregisterCaptureCallback();
Cam_Stream.Close();
Cam_Stream = null;
Cam_Control = null;
Cam.Close();
Cam = null;
SvMaster.Log.WriteError($"相機{SN}取像超时,重新连接");
}
}
catch (Exception ex)
{
SvMaster.Log.WriteError(ex);
}
return image;
}
}说明：代码中SN、Exposure、Gain为外界设置的值
