CentOS7使用yum命令报错

前言

安装CentOS 7 虚拟机，使用yum命令报错，调查整理如下：

使用yum命令，报错信息

[root@localhost ~]# sudo yum install net-tools
已加载插件：fastestmirror
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; 未知的错误"


 One of the configured repositories failed (未知),
 and yum doesn't have enough cached data to continue. At this point the only
 safe thing yum can do is fail. There are a few ways to work "fix" this:

     1. Contact the upstream for the repository and get them to fix the problem.

     2. Reconfigure the baseurl/etc. for the repository, to point to a working
        upstream. This is most often useful if you are using a newer
        distribution release than is supported by the repository (and the
        packages for the previous distribution release still work).

     3. Run the command with the repository temporarily disabled
            yum --disablerepo=<repoid> ...

     4. Disable the repository permanently, so yum won't use it by default. Yum
        will then just ignore the repository until you permanently enable it
        again or use --enablerepo for temporary usage:

            yum-config-manager --disable <repoid>
        or
            subscription-manager repos --disable=<repoid>

     5. Configure the failing repository to be skipped, if it is unavailable.
        Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true

Cannot find a valid baseurl for repo: base/7/x86_64

问题排查

centos7在2024年6月30日,生命周期结束,官方不再进行支持维护，官方的YUM源也下线了，下线的方式是使yum的域名不解析。所以现在需要配置国内的YUM源

1. 通过ip addr检查了一下网络接口发现没问题；
2. ping www.baidu.com 正常ping通，没有问题；
3. 关了一下防火墙也无法解决问题；

解决方案

1. 编辑“CentOS-Base.repo"

sudo vi /etc/yum.repos.d/CentOS-Base.repo

2. 将下文信息替换原有内容；

[base]  
name=CentOS-$releasever - Base  
baseurl=http://mirrors.aliyun.com/centos/$releasever/os/$basearch/  
        http://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/os/$basearch/  
gpgcheck=1  
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7  
  
#released updates   
[updates]  
name=CentOS-$releasever - Updates  
baseurl=http://mirrors.aliyun.com/centos/$releasever/updates/$basearch/  
        http://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/updates/$basearch/  
gpgcheck=1  
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7  
  
#additional packages that may be useful  
[extras]  
name=CentOS-$releasever - Extras  
baseurl=http://mirrors.aliyun.com/centos/$releasever/extras/$basearch/  
        http://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/extras/$basearch/  
gpgcheck=1  
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7  
  
#additional packages that extend functionality of existing packages  
[centosplus]  
name=CentOS-$releasever - Plus  
baseurl=http://mirrors.aliyun.com/centos/$releasever/centosplus/$basearch/  
        http://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/centosplus/$basearch/  
gpgcheck=1  
enabled=0  
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7  
  
#contrib - packages by Centos Users  
[contrib]  
name=CentOS-$releasever - Contrib  
baseurl=http://mirrors.aliyun.com/centos/$releasever/contrib/$basearch/  
        http://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/contrib/$basearch/  
gpgcheck=1  
enabled=0  
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7  
  
# 使用failovermethod指定优先级，这里设置为随机（roundrobin），也可以改为priority并指定每个URL的优先级  
failovermethod=roundrobin

3. 清理YUM缓存并更新

sudo yum clean all
sudo yum makecache
sudo yum update

参考文章

1. https://blog.csdn.net/qq_46302361/article/details/140169844